Administration: File Management
File Operations
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
83
6
To update a system configuration file using TFTP:
STEP 1
Click
Administration
>
File Management
>
File Operations
.
STEP 2
Enter the following fields:
•
Operation Type
—Select
Update
.
•
Destination File Type
—Select one of the configuration file types to update.
•
Copy Method
—Select
TFTP
.
•
Server Definition
—Select whether to specify the TFTP server by IP
address or by domain name.
If Server Definition is
By Address
:
-
IP Version
—Select whether an IPv4 or an IPv6 address is used.
-
If the server is selected by name in the Server Definition, there is no need
to select the IP Version related options.
-
IPv6 Address Type
—Select the IPv6 address type (if used). The options
are:
Link Local
—The IPv6 address uniquely identifies hosts on a single
network link. A link local address has a prefix of
FE80
, is not routable, and
can be used for communication only on the local network. Only one link
local address is supported. If a link local address exists on the interface,
this entry replaces the address in the configuration.
Global
—The IPv6 address is a global Unicast IPV6 type that is visible and
reachable from other networks.
-
Link Local Interface
—Select the link local interface from the list.
•
Server IP Address/Name
—Enter the IP address or name of the TFTP
server.
•
Source File Name
—Enter the update file name.
STEP 3
Click
Apply
to begin the operation.
