Status and Statistics
GVRP
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
36
4
•
Single Collision Frames
—Frames that were involved in a single collision,
but were successfully transmitted.
•
Late Collisions
—Collisions that have been detected after the first 512 bits
of data.
•
Excessive Collisions
—Transmissions rejected due to excessive collisions.
•
Oversize Packets
—Packets greater than 2000 octets received.
•
Internal MAC Receive Errors
—Frames rejected because of receiver errors.
•
Pause Frames Received
—Received flow control pause frames. This field is
only supported for XG ports. When the port speed is 1G, the received pause
frames counter is not operational.
•
Pause Frames Transmitted
—Flow control pause frames transmitted from
the selected interface.
STEP 3
To clear statistics counters:
•
Click
Clear Interface Counters
to clear the selected interfaces counters.
•
Click
View All Interfaces Statistics
to see all ports on a single page.
GVRP
The GVRP page
displays information regarding GARP VLAN Registration Protocol
(GVRP) frames that were sent or received from a port. GVRP is a standards-based
Layer 2 network protocol, for automatic configuration of VLAN information on
switches. It is defined in the 802.1ak amendment to 802.1Q-2005.
GVRP statistics for a port are only displayed if GVRP is enabled globally and on
the port. See the
To view GVRP statistics and/or set the refresh rate:
STEP 1
Click
Status and Statistics
>
GVRP
.
STEP 2
Enter the parameters.
•
Interface
—Select the specific interface for which GVRP statistics are to be
displayed.
