Administration: File Management
Firmware Operations
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
78
6
STEP 2
Enter the following fields:
•
Operation Type
—Select
Update Firmware
or
Backup Firmware
.
•
Copy Method
—Select
HTTP/HTTPS
or
USB
.
•
File Name
—Enter the name of the file to be updated (not relevant for Backup
by HTTP/HTTPS).
STEP 3
Click Apply.
STEP 4
Click Reboot.
To update or backup firmware using TFTP:
STEP 1
Click
Administration
>
File Management
>
Firmware Operations
.
The following fields are displayed:
•
Active Firmware File
—Displays the current, active firmware file.
•
Active Firmware Version
—Displays the version of the current, active
firmware file.
STEP 2
Enter the following fields:
•
Operation Type
—Select
Update Firmware
or
Backup Firmware
.
•
Copy Method
—Select
TFTP
.
•
Server Definition
—Select whether to specify the TFTP server
By IP
address
or
By name
.
If Server Definition is By Address:
•
IP Version
—(If Server Definition is By Address) Select whether an IPv4 or an
IPv6 address for the server is used.
•
IPv6 Address Type
—Select the IPv6 address type (if IPv6 is used). The
options are:
-
Link Local—The IPv6 address uniquely identifies hosts on a single
network link. A link local address has a prefix of FE80, is not routable, and
can be used for communication only on the local network. Only one link
local address is supported. If a link local address exists on the interface,
this entry replaces the address in the configuration.
