Cattron DYNAGEN TOUGH Series TE410, Руководство пользователя

Страница: 36 / 114

DynaGen
TM
TOUGH Series
TM
TE410 - EN
User Manual
36
9M02-9249-A001-EN
Revision A
•
Engine Speed
•
Battery
•
AC Frequency
•
Current Run Time
•
Engine Hours
•
Oil Pressure
•
Fuel Level
•
Engine Coolant Temperature
If all four lines in a page are set to Blank, then the page is not displayed. If two adjacent rows are set to Blank,
the rest of the three pairs of rows move up into the two blank rows
’ area. This means there cannot be more than
one blank line in a row.
Parameters can be placed on more than one line.
4.4 DM1 Page
The DM1 special page is used to display diagnostic trouble codes (DTCs) from an electronic engine module
(ECM). If the engine broadcasts a DTC, then the DM1 page will appear for 5 seconds or until the user scrolls
away. It will disappear and then it will reappear 50 seconds later if the DTC is active.
Also, the controller LED indicator will turn amber to indicate a warning condition.
4.5 Using Cooldown Mode
When the controller is configured to have a cooldown period (see the Engine Logic section) for the engine, there
is some special functionality that must be considered.
The cooldown period is special in that during this time, it will accept a Start command. This means if the engine
is cooling down and a start command is received, the controller will be placed back into a Running Mode and will
not shut down.
The following is an example of how the cooldown functionality works; this process is also shown in the following
figure.
1. Remote Start contacts close.
2. Engine starts and is in Running Mode.
3. Remote Start contacts open.