Cattron DYNAGEN TOUGH Series TE410, Руководство пользователя

Страница: 86 / 114

DynaGen
TM
TOUGH Series
TM
TE410 - EN
User Manual
86
9M02-9249-A001-EN
Revision A
CAUTION
CUSTOM SENDER TABLES CAN ONLY BE CREATED WHEN USING THE CONFIGURATOR
SOFTWARE.
ATTENTION
LES TABLEAUX D’EMISSION PERSONNALISES NE PEUVENT ETRE CREES QU’AVEC LE
LOGICIEL CONFIGURATOR.
Parameter Description
Name The label that will be displayed in the controller (Engine Temp, Oil Pressure, etc.).
Input Type Choose resistance, voltage or current based on the sensor type. Use the Terminal
Descriptions section to determine if your sensor is compatible with a sensor port.
Unit Type Choose temperature, pressure, voltage, current or percentage based on the sensor. This
defines what unit of measurement will be displayed on the front panel (°F, PSI, V, A, %).
The following example outlines the steps for creating a custom sender table:
1. Navigate to the sensor input that will be using your custom sender table.
2. Select a Name, Input Type and Unit Type for the controller (definitions in the table above).
3. Click the check box next to
‘Build Table’ (Step 1 in the following image).
4. From the
‘Sender’ drop-down menu, select ‘Custom’ (Step 2 in the following image).
5. Click the
‘Edit’ button next to the drop-down menu (Step 3 in the following image).
6. Enter the sensor values. Once entered, click Apply, then OK.
!
!