Canon IMAGERUNNER ADVANCE C5030, Руководство по обслуживанию, Страница: 927 / 1455

8
8
8-227
8-227
Service Mode > COPIER > OPTION > ACC
Service Mode > COPIER > OPTION > ACC
COPIER > OPTION > ACC
MIC-TUN Manual adj of voice recognize microphone
Lv.1 Details To manually adjust the voice receiving level (sensitivity) of the
connected voice recognition microphone.
Microphone sensitivity is automatically tuned in user mode; however,
adjust it manually as needed.
Use case When the sensitivity of microphone is not improved by auto tuning
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 255
Default value 128
SRL-SPSW Setting of Serial I/F Kit support
Lv.1 Details To set the support level of the Serial Interface Kit.
To keep processing performance of printer engine, select “1: Priority
on speed”.
To correctly stop the output by the upper limit number of sheets,
select “2: Priority on upper limit number of sheets”.
Use case At installation of Serial Interface Kit
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution With priority on speed, output cannot be correctly stopped by the
upper limit number of sheets.
With priority on the upper limit number of sheets, processing
performance of the printer engine is decreased depending on pickup
location.
Display/adj/set range 0 to 2
0: No support, 1: Priority on speed, 2: Priority on upper limit number
of sheets
Default value 0
CC-EXT Set of information output at CCV control
Lv.1 Details To set the information output of large/small paper size and color/
B&W at CCV control.
Use case When installing a machine which requires the information on large/
small paper size and color/B&W
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Not output, 1: Output
Default value 0
COPIER > OPTION > ACC
PDL-THR Norm PDL print set: External charge mode
Lv.2 Details To set the normal PDL print processing when setting external charge
mode 6/7 with COIN.
When 0 is set, a job is canceled. When 1 is set, a job is executed.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Cancel, 1: Execute
Default value 0
Related service mode COPIER> OPTION> ACC> COIN
CR-TYPE [Not used]
CV-SRL [Not used]
T-8-63