Canon IMAGERUNNER ADVANCE C5030, Руководство по обслуживанию, Страница: 369 / 1455

4
4
4-103
4-103
Parts Replacement and Cleaning > Image Formation System > Removing the Secondary Transfer Inner Roller > Procedure
Parts Replacement and Cleaning > Image Formation System > Removing the Secondary Transfer Inner Roller > Procedure
Removing the Secondary Transfer Inner Roller
■ Preparations
1) Open the Front Cover, Right Lower Cover and Right Upper Cover.
2) Remove the ITB Cover.
3) Remove the ITB Unit.
4) Remove the ITB Cleaning Unit.
5) Remove the ITB.
■
Procedure
CAUTION:
Do not touch the surface of Drive Roller, Secondary Transfer Inner Roller and Primary
Transfer Roller as it may cause the image failure.
F-4-147
1) Pull out the pin, and make the Secondary Transfer Inner Roller Unit straight.
2) Install the pin removed in step 1 to the original position
3) Remove the ITB Unit from the ITB Cover and place it onto the paper in the position where
the roller side faces up.
• 2 claws
Paper
ITB unit
ITB cover
Claws
x2
F-4-148
F-4-149