Canon IMAGERUNNER ADVANCE C5030, Руководство по обслуживанию, Страница: 730 / 1455

8
8
8-30
8-30
Service Mode > COPIER > DISPLAY > ANALOG
Service Mode > COPIER > DISPLAY > ANALOG
■
ANALOG
COPIER > DISPLAY > ANALOG
TEMP Display of outside temperature
Lv.1 Details To display the temperature outside the machine.
This is measured by the Environment Sensor 2 that detects the
outside air.
Use case When checking the temperature outside the machine
Display/adj/set range 0 to 50
Unit deg C
Appropriate target value 20 to 27
HUM Display of outside humidity
Lv.1 Details To display the humidity outside the machine.
This is measured by the Environment Sensor 2 that detects the
outside air.
Use case When checking the humidity outside the machine
Display/adj/set range 0 to 100
Unit %
Appropriate target value 30 to 70
ABS-HUM Display of outside moisture amount
Lv.1 Details To display the absolute moisture content outside the machine.
This is measured by the Environment Sensor 2 that detects the
outside air.
Use case When checking the moisture content outside the machine
Display/adj/set range 0 to 100
Unit g/m3
Appropriate target value 0 to 22
FIX-C Display of Fixing Film temperature
Lv.1 Details To display the center temperature of the Fixing Film detected by the
Main Thermistor 2.
Use case When checking the temperature of Fixing Film
Display/adj/set range 0 to 300
Unit deg C
FIX-E Dspl of Fixing Heater center temperature
Lv.1 Details To display the center temperature of the Fixing Heater detected by
the Main Thermistor 1.
Use case When checking the temperature at the center of Fixing Heater
Display/adj/set range 0 to 300
Unit deg C
FIX-E2 Dspl of Fixing Heater front edge temp
Lv.1 Details To display the front edge temperature of the Fixing Heater detected
by the Sub Thermistor 1.
Use case When checking the edge temperature of the Fixing Heater
Display/adj/set range 0 to 300
Unit deg C
COPIER > DISPLAY > ANALOG
TEMP2 Display of inside temperature
Lv.1 Details To display the temperature inside the machine measured by the
Environment Sensor 1.
Use case When checking the temperature inside the machine
Display/adj/set range 0 to 100
Unit deg C
Appropriate target value 20 to 27
HUM2 Display of inside humidity
Lv.1 Details To display the humidity inside the machine measured by the
Environment Sensor 1.
Use case When checking the humidity inside the machine
Display/adj/set range 0 to 100
Unit %
Appropriate target value 30 to 70
FIX-E3 Dspl of Fixing Heater rear edge temp
Lv.1 Details To display the rear edge temperature of the Fixing Heater detected
by the Sub Thermistor 2.
Use case When checking the edge temperature of the Fixing Heater
Display/adj/set range 0 to 300
Unit deg C
T-8-5