Canon IMAGERUNNER ADVANCE C5030, Руководство по обслуживанию, Страница: 457 / 1455

6
6
6-3
6-3
Troubleshooting■>■Test■Print■>■Steps■to■select■the■test■print■TYPE
Troubleshooting■>■Test■Print■>■Steps■to■select■the■test■print■TYPE
Test■Print
Overview
This■machine■have■the■following■test■print■TYPE■and■you■can■judge■the■image■failure■that■is■checked■as■“Yes”■in■the■following■image■check■items■with■each■test■print.
If■the■image■failure■occurred■on■normal■output■does■not■reappear■on■the■test■print,■it■may■be■caused■by■the■PDL■input■or■reader■side.
PG■
TYPE
TYPE■Pattern
Items
Originator
Gradation Fogging
Transfer■
Fault
Black■line■
(Color■line)
White■line
Uneven■
Density
Uneven
Density
at■the■Front■/
Rea
Right■
Angle
Straight■
Lines
Color■
displacement,
0 Normal■copy■/■print ----
1to3 ---(For■R&D) ----
4 16■gradations Yes Yes Yes Yes Main■controller■PCB■2
5 Full■half-tone Yes Yes Yes Yes Yes Main■controller■PCB■2
6 Grid Yes Yes Yes Main■controller■PCB■2
7to9 ---(For■R&D) ----
10 MCYBk■horizontal■stripes■
(sub■scanning■direction)
Yes Yes Yes
Main■controller■PCB■2
11 ---(For■R&D) ----
12 64-gradation Yes Yes Yes Main■controller■PCB■2
13 ---(For■R&D) ----
14 Full■color■16-gradation Yes Yes Main■controller■PCB■2
15to100 ---(For■R&D) ----
Steps■to■select■the■test■print■TYPE
1)■Set■the■number■of■print,■paper■size■etc.
2)■Select:■COPIER■>■TEST■>■PG.
3)■Select:■COPIER■>■TEST■>■PG■>■TYPE.
4)■Enter■the■desired■TYPE■number■and■press■OK■key.
5)■Select■the■corresponding■color■(setting■1■means■output)■in■COLOR-Y/M/C/K.
6)■Set■the■density■in■DENS-Y/M/C/K■(this■is■enabled■for■TYPE=5■only).
7)■Press■start■key.
T-6-2