Canon IMAGERUNNER ADVANCE C5030, Руководство по обслуживанию, Страница: 877 / 1455

8
8
8-177
8-177
Service Mode > COPIER > OPTION > NETWORK
Service Mode > COPIER > OPTION > NETWORK
COPIER > OPTION > NETWORK
NS-CMD5 Limit CRAM-MD5 auth method at SMTP auth
Lv.2 Details To restrict use of CRAM-MD5 authentication method at the time of
SMTP authentication.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
NS-GSAPI Limit GSSAPI auth method at SMTP auth
Lv.2 Details To restrict use of GSSAPI authentication method at the time of SMTP
authentication.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
NS-NTLM Limit NTLM auth method at SMTP auth
Lv.2 Details To restrict use of NTLM authentication method at the time of SMTP
authentication.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
NS-PLNWS Limit plaintext auth at SMTP auth encry
Lv.2 Details To restrict use of PLAIN/LOGIN authentication, which is plaintext
authentication, at the time of SMTP authentication under the
environment where the communication packet is encrypted.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
COPIER > OPTION > NETWORK
NS-PLN Limit plaintext auth at SMTPauth noencry
Lv.2 Details To restrict use of PLAIN/LOGIN authentication, which is plaintext
authentication, at the time of SMTP authentication under the
environment where the communication packet is not encrypted.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
NS-LGN Limit LOGIN authentication at SMTP auth
Lv.2 Details To restrict use of LOGIN authentication at the time of SMTP
authentication.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
MEAP-PN HTTP port No.setting of MEAP application
Lv.2 Details To set HTTP port number of MEAP application.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not specify port 8080 when the print server is connected.
Otherwise, you cannot browse the device RUI in which MEAP
authentication application is running (Port 8080 is reserved for
redirection of EFI Controller to the iR side.)
Display/adj/set range 0 to 65535
Default value 8000
RMT-LGIN Set to allow remote login to SSH server
Lv.2 Details To set whether to allow remote login from the remote host (SSH
client: DA) to debug console of the SSH server.
Use case As needed (This mode is used for the Japanese models only. This
mode is not used with overseas models (outside Japan).)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution This item is enabled when the setting value of SSH-SW is ON.
Display/adj/set range 0 to 1
0: Disabled, 1: Enabled
Default value 1
Related service mode COPIER> OPTION> NETWORK> SSH-SW(LEVEL2)