Canon IMAGERUNNER ADVANCE C5030, Руководство по обслуживанию, Страница: 913 / 1455

8
8
8-213
8-213
Service Mode > COPIER > OPTION > USER
Service Mode > COPIER > OPTION > USER
COPIER > OPTION > USER
TRAY-FLL Set of target tray for tray full notice
Lv.2 Details To set the tray which is the target of an output tray full notification.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: All trays to which paper can be output, 1: All trays which are
specified as the dedicated trays
Default value 0
PRNT-POS ON/OFF of all pauses at error job cancel
Lv.2 Details To set whether to pause the print operation of following jobs when
a job is canceled due to an error inside the machine (#037, etc.)
except service calls during PDL print.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
AFN-PSWD Access limit setting to user mode
Lv.2 Details To set whether to enter a password when accessing to the user
mode.
When 1 is set, password entry of system administrator is required
after pressing Settings/Registration key.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Password is not required, 1: Password is required
Default value 0
PTJAM-RC Auto reprint setting at PDL print jam
Lv.2 Details To set whether to automatically restart printing after clearing jam that
occurs with PDL print.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Not automatically reprinted, 1: Automatically reprinted
Default value 1
COPIER > OPTION > USER
PDL-NCSW Card mngm setting for PDL print job
Lv.2 Details To set to make PDL print job be subject to card management by the
Card Reader.
With the setting to enable this mode, PDL print is available only
when the card ID of the card inserted to the Card Reader matches
the department ID.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: PDL print is available with no card inserted.
1: PDL print is available only when the card ID matches the
department ID in the case that the card is inserted.
Default value 0
SLP-SLCT Usage setting of network applications
Lv.2 Details With the setting to use network-related application, the machine can
be recovered through network because it does not shift to sleep
mode 1.
For this machine to recover from sleep mode 1 through network,
a particular packet needs to be received; however, the existing
network-related application does not send this packet. With the
setting not to use the network-related application, this machine
cannot recover from sleep mode 1 through network when it gets into
sleep mode 1.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this at the normal service.
Display/adj/set range 0 to 1
0: Not used (Shift to sleep mode 1 is available.)
1: Used (Shift to sleep mode 1 is not available.)
Default value 0
PS-MODE Compatible mode setting at PS usage
Lv.2 Details To set for compatibility with existing machine regarding image
process or print specification with PS print.
Selecting 1 enables to have the print result equivalent to that of
iR2200/2800/3300 series while selecting 2 enables to have the print
result equivalent to that of iR105 series.
Use case At replacement
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 65535
0: No use of compatibility mode with PS
1: Compatible in a conventional manner with PS Type3 halftone
command (Forming dither pattern: opposite order)
2 to 65535: Spare
Default value 0