Canon IMAGERUNNER ADVANCE C5030, Руководство по обслуживанию, Страница: 903 / 1455

8
8
8-203
8-203
Service Mode > COPIER > OPTION > IMG-FIX
Service Mode > COPIER > OPTION > IMG-FIX
COPIER > OPTION > IMG-FIX
THIN-LP Set of fixing arch ctrl with thin paper
Lv.2 Details To set the arch control method between the secondary transfer and
fixing when feeding thin paper (52 g/m2).
Normally, the arch control is executed at the point where arch on the
trailing edge of paper is small.
When 1 is set in the case that an image failure (crepe mark) occurs
with thin paper, the control is always executed at the point where the
arch on a paper is large while feeding thin paper.
Use case When an image failure (crepe mark) occurs with thin paper
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1
0: Arch control at the point where arch is small, 1: Arch control to
make the arch large with thin paper
Default value 1
TMP-TB11 Fixing control temperature:Recycled ppr
Lv.1 Details To set the offset of fixing control temperature for recycled paper (52
to 105 g/m2).
As the value is incremented by 1, the control temperature is
increased by 5 deg C.
Increase the value when a fixing failure occurs, and decrease the
value when fixing offset occurs.
Use case When offset/fixing failure occurs on recycled paper
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range - 3 to 2
-3: -15 deg C, -2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2:
+10 deg C
Unit deg C
Default value 0
COPIER > OPTION > IMG-FIX
FXS-TM11 ITOP control temperature:Recycled ppr
Lv.1 Details To set the offset of ITOP control temperature for recycled paper (52
to 105 g/m2).
As the value is incremented by 1, the control temperature is
increased by 5 deg C.
Increase the value when a fixing failure occurs on the leading edge
of paper, and decrease the value when uneven gloss occurs on the
leading edge (94mm).
Use case - When a fixing failure occurs on the leading edge of paper
- When uneven gloss occurs on the leading edge (94mm)
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range - 3 to 2
-3: -15 deg C, -2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2:
+10 deg C
Unit deg C
Default value 0
FXTBL-SW Set fixing temp control table: Plain 1
Lv.2 Details To set the fixing temperature control table for plain paper 1 (64 to 81
g/m2).
When mottled image occurs on the plain paper 1 regardless of
appropriate temperature of the Fixing Assembly, set 1. When plain
paper 1 is fed, the fixing temperature control table for recycled paper
is applied. However, for the fixing control temperature and ITOP
control temperature, the offset setting for plain paper 1 (TEMP-TBL
and FX-S-TMP) is reflected.
Use case When mottle image occurs on the plain paper while the Fixing
Assembly is hot, the fixing temperature control table for plain paper 1
is switched to the one for recycled paper.
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1
0: For plain paper 1, 1: For recycled paper
Default value 0
Related service mode COPIER> OPTION> CUSTOM> TEMP-TBL
COPIER> OPTION> IMG-FIX> FX-S-TMP