Canon IMAGERUNNER ADVANCE C5030, Руководство по обслуживанию, Страница: 333 / 1455

4
4
4-67
4-67
Parts Replacement and Cleaning > Main Controller > Removing the HDD > Actions after Replacement
Parts Replacement and Cleaning > Main Controller > Removing the HDD > Actions after Replacement
■
Actions after Replacement
1) HDD format
1-1) Start with the safe mode. (While pressing 2 and 8 keys simultaneously, turn ON the main
power switch.)
1-2) Use SST to format all partitions.
2) Downloading system software
2-1) Use SST to download the system software (System, LANG, RUI and others).
3) Initializing the key, certificate and CA certificate
(Lv.2) COPIER > FUNCTION > CLEAR > CA-KEY
4) Turning OFF and ON the main power switch
5) Restoring the backup data
Use the Remote UI.
Management Settings > Data Management > Import/Export
6) Resetting/registering the data
While referring to the list of set/registered data which was printed before replacement,
reset/register the data.
7) When the user generates and adds the encryption key, certificate and/or CA certificate,
request the user to generate them again.
8) Executing “Auto Adjust Gradation (Full Adjust)” Settings/Registration mode: Adjustment/
Maintenance > Adjust Image Quality > Auto Adjust Gradation
● When using the Card Reader and imageWARE Accounting Manager
1) Go to COPIER > FUNCTION> INSTALL > CARD and enter the numerical value of the
leading card which is used for Department ID.
Then, press “OK” button. (e.g.: If No.1 to No.1000 cards are used for Department ID, enter
“1” of the leading card.)
2) After turning OFF and ON the main power switch, perform the following operations from
Settings/Registration mode.
In Management Settings > User Management > Department ID Management > Page
Totals, be sure that “ID00000001” to “ID00001000” are created.
Set the following: Preferences > Network > TCP / IP Settings > IPv4 Settings>IP Address
Settings > IP Address, Gateway Address, Subnet Mask
In Management Settings > User Management> System Manager Information Settings>
System Manager ID and System PIN, register any number for them. Then, turn OFF and
ON the main power switch.
If “System Manager ID” and “System PIN” are not registered, “card registration to device”
cannot be executed for the imageWARE Accounting Manager setting operation.
3) Download the card ID from imageWARE Accounting Manager to the Main Body again.
4) After downloading is completed, go to Management Settings > User Management >
Department ID Management > Page Totals. Be sure that only the downloaded card ID is
displayed.
5) Print using the user card registered from imageWARE Accounting Manager.
Be sure that the card information used for the target devices of imageWARE Accounting
Manager is collected.
Points to Note when Using the System Software-installed HDD When using the HDD which
was installed the system software of the other machine (different serial number), be sure to
format the HDD after the installation.
If the HDD is not formatted, the operation cannot be guaranteed.
Points to Note when Using the System Software-installed HDD:
When using the HDD which was installed the system software of the other machine
(different serial number), be sure to format the HDD after the installation. If the HDDis
not formatted, the operation cannot be guaranteed.