Canon IMAGERUNNER ADVANCE C5030, Руководство по обслуживанию, Страница: 189 / 1455

2
2
2-153
2-153
Technology■>■MEAP■>■Backup■of■the■MEAP■Application■Area■and■Recovery■of■the■Backup■Data■Using■SST■>■Procedure■for■backing■up■the■MEAP■application■area■using■SST
Technology■>■MEAP■>■Backup■of■the■MEAP■Application■Area■and■Recovery■of■the■Backup■Data■Using■SST■>■Procedure■for■backing■up■the■MEAP■application■area■using■SST
■ ● Data■backed■up■using■SST■in■the■case■of■iR-ADV■devices
In■the■case■of■iR-ADV■devices,■menus■are■implemented■as■MEAP■application.■Therefore■the■
following■items■can■be■also■backed■up■(stored■as■Meapbackup.bin).
•■ Setting■items■of■each■menu■in■the■main■menu■(■Copy,■Scan■and■Send,■Fax,■Scan■and■
Store,■Access■Stored■Files,■Fax/I-Fax■Inbox,■).
•■ Favorite■settings
•■ Default■settings
•■ Settings■of■option■shortcuts
•■ Previous■settings
•■ Settings■of■quick■menu
•■ Button■size■information
•■ Wallpaper■settings
•■ Quick■menu■button■information
•■ Restrict■quick■menu■use
■
■
Requirements■for■Backup■Using■the■SST
The■following■conditions■must■be■met■for■use■of■the■function:
1)■Device■Firmware■Version
Device■Firmware■Version■for■SST■(Ver4.2x)
Boot■ROM System SST
iR-ADV■C2030/C2020■series Boot■ROM■is■not■
equipped.
Already■supported■
since■the■1st■
version.
The■version■supporting■
the■corresponding■
devices.
imageRUNNER■ADVANCE■
series■other■than■iR-ADV■
C2030/C2020■series
Already■supported■
since■the■1st■
version.
Already■supported■
since■the■1st■
version.
The■version■supporting■
the■corresponding■
devices.
2)■SST■Version
Version■4.2.x■or■later.■An■earlier■version■will■not■permit■the■use■of■the■function.■If■needed,■
upgrade■the■SST.
3)■Space■for■backup
To■back■up■the■HDD■of■the■iR,■the■PC■must■have■approx■1024MB■of■free■space■at■
maximum.■Sizes■of■backup■files■depend■on■actual■data■capacities■to■be■backed■up.
T-2-84
■
■
Procedure■for■backing■up■the■MEAP■application■area■using■SST
1)■Switching■Login■Service■/■Backup■of■Login■User■Information
If■SSO-H■is■used■for■the■login■service,■switch■to■default■authentication■before■backing■
up■the■user■information.■Although■SST■will■back■up■local■device■user■information,■it■is■
recommended■to■export■the■user■information■just■in■case.■For■local■device■user■information■
backup,■go■to■User■Management■page■of■SSO-H■site■and■export■the■data.■(The■SSO-H■
login■page■opens■with■the■URL■"https://<device■IP■address>:8443/sso/").
CAUTION:
•■ If■a■HDD■of■a■system■that■uses■SSO-H■is■formatted■without■changing■the■login■
service■to■the■default■authentication,■the■error■message■“The■login■service■must■be■
set■again■with■SMS”■appears■and■the■system■cannot■start■up■when■you■attempt■to■
restart■the■system■after■formatting.
•■ If■this■problem■occurs,■change■the■login■service■to■SSO-H■with■SMS.■If■you■cannot■
access■to■SMS■since■you■do■not■have■the■IP■address■of■the■device,■start■the■system■
with■FIXIP■mode■-hold■down■the■numeric■keys■1■and■7■and■turn■the■power■switch■on.■
The■IP■address■“172.16.1.100”■will■be■automatically■assigned■for■the■device.■Then■
log■in■to■SMS■specifying■the■address.
2)■Starting■the■device■in■Download■Mode
Press■[2]■and■[8]■buttons■at■the■same■time■on■the■control■panel■and■turn■on■the■main■power■
switch■to■start■the■device■in■Download■Mode.■Note■that■SST■backup■function■is■enabled■
only■in■Download■Mode.
3)■Connecting■the■main■unit■to■the■PC■to■start■SST
Connect■the■main■unit■to■the■PC■with■SST■installed■using■the■crossing■cable■and■the■like■to■
start■SST■on■the■PC.