Canon IMAGERUNNER ADVANCE C5030, Руководство по обслуживанию, Страница: 790 / 1455

8
8
8-90
8-90
Service Mode > COPIER > ADJUST > CCD
Service Mode > COPIER > ADJUST > CCD
COPIER > ADJUST > CCD
DFCH-R10 Complex chart No.10 data (R) [Back side]
Lv.1 Details To derive the front/back side linearity, set the Red data (for paper
back) of No.10 image in DADF complex chart.
Enter the value of service label on the Reader.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2550
Default value 0
Related service mode COPIER> ADJUST> CCD> DFCH-R2, DFCH-B2, DFCH-B10,
DFCH-G2, DFCH-G10
DFCH-B2 Complex chart No.2 data (B) [Back side]
Lv.1 Details To derive the front/back side linearity, set the Blue data (for paper
back) of No.2 image in DADF complex chart.
Enter the value of service label on the Reader.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 2550
Default value 2000
Related service mode COPIER> ADJUST> CCD> DFCH-R10, DFCH-B2, DFCH-B10,
DFCH-G2, DFCH-G10
DFCH-B10 Complex chart No.10 data (B) [Back side]
Lv.1 Details To derive the front/back side linearity, set the Blue data (for paper
back) of No.10 image in DADF complex chart.
Enter the value of service label on the Reader.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2550
Default value 0
Related service mode COPIER> ADJUST> CCD> DFCH-R2, DFCH-B2, DFCH-B10,
DFCH-G2, DFCH-G10
COPIER > ADJUST > CCD
DFCH-G2 Complex chart No.2 data (G) [Back side]
Lv.1 Details To derive the front/back side linearity, set the Green data (for paper
back) of No.2 image in DADF complex chart.
Enter the value of service label on the Reader.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 2550
Default value 2000
Related service mode COPIER> ADJUST> CCD> DFCH-R10, DFCH-B2, DFCH-B10,
DFCH-G2, DFCH-G10
DFCH-G10 Complex chart No.10 data (G) [Back side]
Lv.1 Details To derive the front/back side linearity, set the Green data (for paper
back) of No.10 image in DADF complex chart.
Enter the value of service label on the Reader.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2550
Default value 0
Related service mode COPIER> ADJUST> CCD> DFCH-R2, DFCH-B2, DFCH-B10,
DFCH-G2, DFCH-G10
MTF2-M10 MTF value 10 setting: horz scan [Front]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 20 to 85
Default value 50
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
MTF2-M11 MTF value 11 setting: horz scan [Front]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 20 to 85
Default value 50
Related service mode COPIER> FUNCTION> CCD> MTF-CLC