Canon IMAGERUNNER ADVANCE C5030, Руководство по обслуживанию, Страница: 871 / 1455

8
8
8-171
8-171
Service Mode > COPIER > OPTION > FNC-SW
Service Mode > COPIER > OPTION > FNC-SW
COPIER > OPTION > FNC-SW
SELF-CHK Set high voltg error condtn detect func
Lv.2 Details To set the high voltage error condition detection function.
Use case For R&D use
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 15
0:OFF
1:ON
2 to 15:Not used
Default value 0
HOME-SW Set screen displayed with Main Menu key
Lv.1 Details To set whether to display the main menu screen or the screen
registered as the startup screen when pressing Main Menu key.
Use case Upon user’s request (to change the startup screen)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1
0: Main Menu screen, 1: Screen registered as the startup screen
Default value 0
NO-LGOUT Display/hide of logout button
Lv.1 Details To set whether to display or hide [Logout] button.
When 0 is set, [Logout] button is displayed on the screen, and logout
with the ID key is enabled. (Normal)
When 1 is set, [Logout] button is not displayed, and logout with the
ID key is disabled.
Use case Upon user’s request (for customization, etc.)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1
0: Display, 1: Hide
Default value 0
T-DLV-BK Set of Bk-toner level displaying alarm
Lv.2 Details To set the Bk-toner level to display “absence of toner” message.
Use case When changing the timing to notify the end of life according to the
usage status
Adj/set/operate method Enter the setting value, and then press OK key.
Caution
Since toner level is calculated based on the developing supply count,
some errors may occur.
Display/adj/set range 0 to 40
Unit %
Default value EUR: 5, Other:10
Related service mode COPIER > OPTION > FNC-SW > T-DLV-CL
COPIER > OPTION > FNC-SW
T-DLV-CL Set Y/M/C-toner level displaying alarm
Lv.2 Details To set the Y/M/C-toner level to display “absence of toner” message.
Use case When changing the timing to notify the end of life according to the
usage status
Adj/set/operate method Enter the setting value, and then press OK key.
Caution
Since toner level is calculated based on the developing supply count,
some errors may occur.
Display/adj/set range 0 to 40
Unit %
Default value 5
Related service mode COPIER > OPTION > FNC-SW > T-DLV-BK
JM-ERR-D Handling 0CAx jam as an error: DCON
Lv.2 Details To display 0CAx jam as the error E996-0CAx (x=1, 2, 3, F).
By handling the jam as an error, the machine stops, so that loss of
the log can be prevented.
Be sure to enable the service mode at the user’s site where 0CAx
jam occurs.
After that, if the error E996-0CAx occurs, the log which has been
backed up can be obtained.
Use case When obtaining a log at the occurrence of 0CAx jam
Adj/set/operate method 1) Enter the setting value, and then press OK key.
Display/adj/set range
0: Display as a jam, 1: Display as an error
Default value 0
JM-ERR-R Handling 0071 jam as an error: RCON
Lv.2 Details To display 0071 jam as the error E996-0071.
By handling the jam as an error, the machine stops, so that loss of
the log can be prevented.
Be sure to enable the service mode at the user’s site where 0CAx
jam occurs.
After that, if the error E996-0CAx occurs, the log which has been
backed up can be obtained.
Use case When obtaining a log at the occurrence of 0071 jam
Adj/set/operate method 1) Enter the setting value, and then press OK key.
Display/adj/set range
0: Display as a jam, 1: Display as an error
Default value 0
Related service mode COPIER > OPTION > FNC-SW > JM-ERR-D