Canon IMAGERUNNER ADVANCE C5030, Руководство по обслуживанию, Страница: 788 / 1455

8
8
8-88
8-88
Service Mode > COPIER > ADJUST > CCD
Service Mode > COPIER > ADJUST > CCD
COPIER > ADJUST > CCD
MTF-M1 MTF value 1 setting: horz scan [Back]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 20 to 80
Default value 50
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
MTF-M2 MTF value 2 setting: horz scan [Back]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 20 to 80
Default value 50
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
MTF-M3 MTF value 3 setting: horz scan [Back]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 20 to 80
Default value 50
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
MTF-M4 MTF value 4 setting: horz scan [Back]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 20 to 80
Default value 50
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
MTF-M5 MTF value 5 setting: horz scan [Back]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 20 to 80
Default value 50
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
COPIER > ADJUST > CCD
MTF-M6 MTF value 6 setting: horz scan [Back]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 20 to 80
Default value 50
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
MTF-M7 MTF value 7 setting: horz scan [Back]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 20 to 80
Default value 50
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
MTF-M8 MTF value 8 setting: horz scan [Back]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 20 to 80
Default value 50
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
MTF-M9 MTF value 9 setting: horz scan [Back]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 20 to 80
Default value 50
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
MTF-S1 MTF value 1 setting: vert scan [Back]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 20 to 80
Default value 50
Related service mode COPIER> FUNCTION> CCD> MTF-CLC