
9
9
9-125
9-125
Installation■>■Expansion■Bus-F1/F2,■IPSec■Board-B2,■Wireless■LAN■Board-B1/B2■Installation■Procedure■>■Installation■Procedure■>■To■install■Expansion■Bus-F1/F2■and■IPSec■Board-B2■in■the■same■time
Installation■>■Expansion■Bus-F1/F2,■IPSec■Board-B2,■Wireless■LAN■Board-B1/B2■Installation■Procedure■>■Installation■Procedure■>■To■install■Expansion■Bus-F1/F2■and■IPSec■Board-B2■in■the■same■time
5)■Install■the■Main■Controller■PCB■1■to■the■host■machine.
CAUTION:■
Lift■the■handle,■insert■the■Main■
Controller■PCB■1■until■it■stops,■
tilt■the■grip■and■install■the■2■
screws.
Make■sure■to■tilt■the■grip■slowly■
on■both■sides■simultaneously.
Check■that■the■Main■Controller■
PCB■1■is■installed■properly.
Grip
x2
F-9-250
6)■Install■the■USB■Cable■and■Control■Panel■Communication■Cable.
7)■If■Reader■is■installed,■install■the■Reader■Power■Cable.
NOTE:■
Handle■the■Reader■Power■
Cable■from■the■connector■
side■and■make■a■slack■at■A■
part.
Bend■the■Reader■Power■
Cable■at■a■right■angle■on■B■
part.
x2
Connectors
Reader Power Cable
Cable Guide
Wire Saddles
[B]
[A]
F-9-251
8)■Install■the■Right■Rear■Cover■1.
9)■Close■the■Right■Lower■Cover.
10)■Close■the■Right■Upper■Cover.
Содержание IMAGERUNNER ADVANCE C5030
