Canon IMAGERUNNER 2530, Руководство по обслуживанию

Страница: 238 / 336

9
9
9-2
9-2
Installation > Making Pre-Checks > Selecting the Site of Installation
Installation > Making Pre-Checks > Selecting the Site of Installation
How to check this Installation Procedure
When Using the parts included in the package
A symbol is described on the illustration in the case of using the parts included in the package
of this product.
Symbols in the Illustration
The frequently-performed operations are described with symbols in this procedure.
Connector
Disconnect
Screw
Tighten Remove Connect Secure Free
Harness
Push Insert Plug in Turn on
Sound Check Check Visual Check
Claw
Remove
Checking instruction
F-9-1 F-9-1
F-9-2 F-9-2
Making Pre-Checks
Selecting the Site of Installation
The followings are the condition for installation environment.
It is better to see the planned location of installation before carrying the host machine in the
user site.
1) The host machine can singly connect to the outlet of rated +/-10V, 15A or more.
2) The installation site must be in the following environment. Especially, avoid installing the
machine near the faucet, water boiler, humidifier, or refrigerator.
Operating environment:Temperature: 10.0 to 30.0oC Humidity: 20 to 80%
3) Avoid installing the machine near fire, in an area subject to dust or ammonia gas. When
installing the machine in a place exposed to direct rays of the sun, it is recommended that
curtains be hung over the windows.
4) The amount of ozone generated during use of the machine is below the harmful level.
However, if the machine is used for a long time in a poor-ventilated room, ozone may smell.
To keep the work environment comfortable, the room must be well-ventilated properly.
5) None of the machine feet should float. The machine must be held level constantly.
6) The machine must be installed at least 10 cm away from the surrounding walls and there
must be an adequate space for operating the machine.
•