Bull NovaScale R440 E1, Руководство пользователя, Страница: 64 / 366

User Guide
63
www.bull.com
BIOS Setup Utility
The BIOS Setup Utility is used to change system configuration parameters. The utility
is resident in the system FLASH memory and does not require a diskette or an
operating system present to run.
Using the BIOS Setup Utility
You can access the BIOS Setup utility when you turn on or reboot your system.
Note: The server is factory-configured with the best
parameters. Run the Setup utility only when it is required.
To run the BIOS Setup Utility, perform the following procedure:
1. Power-on or reboot the system. “Press <F2> to enter SETUP” displays.
2. Press F2 . The BIOS Setup Utility starts and the Main Menu is displayed. The
menu bar at the top of the Main Menu lists the following selections:
Use the arrow keys to select a menu or an item on a displayed menu. Press the value
keys (listed in the table below) to cycle through the allowable values for the selected
field. Use the Exit menu’s “Save Values” selection to save the current values on all the
menus.
To display a submenu, position the cursor on a selection that has a submenu and press
ENTER . An arrow precedes selections with submenus.
Refer to the following table for information on the keys that you use with BIOS Setup.
These keys are also listed at the bottom of the Setup menu.
Table 1: BIOS Setup Menus
Menu Use
Main Menu
Use this menu for basic system configuration.
Advanced Menu
Use this menu for setting the Advanced Features available on
your system.
Security Menu Use this menu for setting passwords.
Server Menu Use this menu to configure server specific options, the redirection
console and to display server information.
Boot Menu
Use this menu to configure Boot Device priority.
Exit Menu Exits the current menu.
Table 2: BIOS Setup Keys
Key Function in Setup Menu
F1 or Alt-H Get Help about an item.
ESC Exit the current menu and return to the previous menu.
Left or right arrow keys Move between menus.
Up or down arrow keys Move cursor up and down. The cursor moves only to the settings
that you can change.