Bull NovaScale R440 E1 Скачать руководство пользователя страница 301 | Manualshive

Страница: 301 / 366

Bull NovaScale R440 E1 Скачать руководство пользователя страница 301

User Guide

300

www.bull.com

Installing Microsoft Windows Server 2003

You will need the following for the installation of the Windows Server 2003:

■

ExpressBuilder DVD

■

Microsoft Windows Server 2003 Standard Edition (CD-ROM), Microsoft
Windows Server 2003 Enterprise Edition (CD-ROM), Microsoft Windows Server
2003 R2 Standard Edition (CD-ROM), or Microsoft Windows Server 2003 R2
Enterprise Edition (CD-ROM).

■

Microsoft Windows Server 2003 Service Pack (CD-ROM).

■

User's Guide

■

Getting Started

■

Windows Server 2003 OEM-Disk for ExpressBuilder

Before installing, create Windows Server 2003 OEM-Disk for ExpressBuilder.

Creating "Windows 2003 OEM-Disk for ExpressBuilder"

You can create the Windows 2003 OEM-Disk for ExpressBuilder with the following
two procedures:

Creating from the menu which appears when running BULL NovaScale Server with
ExpressBuilder

Use this procedure if you have only the BULL NovaScale Server to create the
Windows 2003 OEM-Disk for ExpressBuilder.

■

If you have only the BULL NovaScale Server to create the Windows Server 2003
OEM-Disk for ExpressBuilder, use this procedure.

1.

Prepare a 3.5-inch floppy disks.

2.

Turn on your BULL NovaScale Server.

3.

Insert the ExpressBuilder DVD in the optical device drive.

4.

Pressthe Reset switch or press

Ctrl

+

Alt

+

Delete

to reboot the server. (You

may also turn off and then on again to reboot the server.)
The system will boot from the DVD and the ExpressBuilder starts.

5.

Select [Create the OEM-Disk for Windows] from the [Tools Menu].

6.

Select [Create a Windows Server 2003 OEM-Disk for ExpressBuilder] from

[Create OEM-Disk] and click [Perform].

7.

Insert a diskette in the floppy disk drive according to the on-screen instruction.

Windows Server 2003 OEM-Disk for ExpressBuilder will be created.

8.

Write-protect and label the diskette, then keep it in a safe place.

«
...
299
300
301
302
303
...
»

Содержание NovaScale R440 E1















































































































































































































































































































































































Отзывы:

Нет отзывов