Bull NovaScale R440 E1, Руководство пользователя, Страница: 251 / 366

User Guide
250
www.bull.com
■
Flashing switching back and forth between green and amber
The lamp indicates that reconstruction (rebuild) processing is being performed for
the hard disk. (This flashing does not indicate a failure.) When a failing hard disk
is replaced in a RAID system, the system rebuilds the data. (Auto-rebuild function)
The lamp switches back and forth between green and amber during rebuild
processing.
The lamp goes off when the rebuild processing finishes.
It turns amber when the rebuild processing fails.
Caution
If the server is turned off during rebuild processing, the process-
ing is stopped. Restart the server, mount the new hard disk in
hot swap mode, and then perform rebuild processing again.
Observe the following notes on using the auto-rebuild function.
■
Do not turn the power off. (Once the power is turned off, the
auto-build function does not start.)
■
Let 90 seconds or more pass between when dismounting a
failing hard disk and when mounting the new one.
■
Do not replace a failing hard disk while rebuild processing is
being performed for another hard disk.