Bull NovaScale R440 E1, Руководство пользователя, Страница: 60 / 366

User Guide
59
www.bull.com
■
When the server appears to fail.
■
When the server beeps many times between power-on and OS start-up.
■
When an error message appears on the screen.
Note: For error messages that appear on the display unit,
see “Error Messages” on page 240 .
Caution
■
Always allow POST to complete before powering down your
server.
■
The server management logic on your system board moni-
tors and logs system voltage changes. When powering
down your system you may experience a 1 to 5 seconds
delay from the time you press the push-button power on/off
switch on the front panel and your system powering down.
This is normal system operation and is required by the
server management logic.
If you have problems powering on your server, see “Problem Solving” on page 210 .
After you have powered on your server, insert the ExpressBuilder DVD into the optical
device drive and follow the screen prompts to run ExpressBuilder.
POST Execution Flow
The following describes the progress of POST in the chronological order.
Caution
■
Do not make key entries or perform mouse operations while
POST is in progress.
■
Some system configurations may display the message
"Press Any Key" to prompt a key entry. This message is
driven by BIOS of an installed optional board. Make sure to
read the manual that comes with the optional board before
any key entry.
■
Powering on the server, after you installed or removed an
optional PCI board or moved it to another slot, may display
the message that indicates incorrect board configuration and
suspend POST.