Bull NovaScale R440 E1, Руководство пользователя, Страница: 242 / 366

User Guide
241
www.bull.com
POST Error Messages
When POST detects an error, it displays an error message on the display unit screen.
The following table lists error messages and actions to take.
Note: Note the displayed messages before consulting with
your sales agent. Alarm messages are useful information for
maintenance.
Table 34: POST Error Messages
Error
code Error message Recommended Action
0200
Failure Fixed Disk Contact your service representative.
0210 Stuck Key. Disconnect the keyboard and connect it again.
0211 Keyboard error Disconnect the keyboard and connect it again.
If the error cannot be corrected, contact your service
representative.
0213 Keyboard locked - Unlock key switch. Release the lock of the key switch. If the error cannot
be corrected in spite of the release of the lock,
contact your service representative.
0220 Monitor type does not match CMOS
Run SETUP. Start the SETUP. If the error cannot be corrected in
spite of the start of SETUP, contact your service
representative.
0230 System RAM Failed at offset. Contact your service representative.
0231 Shadow Ram Failed at offset.
0232 Extended RAM Failed at address line.
0250 System battery is dead - Replace and run
SETUP. Contact your service representative to replace the
battery. (After restarting the computer, start the
SETUP to provide the setting again.)
0251 System CMOS checksum bad - Default
configuration used. The default values have just been set. Start the
SETUP to provide the setting again. If the error
cannot be corrected, contact your service
representative.
0252 Password checksum bad - Passwords
cleared. The password has just been cleared. Start the
SETUP to provide the setting again.
0260 System timer error. Start the SETUP to set the date and time again. If the
same error occurs successively in spite of the
resetting, contact your service representative.
0270 Real time clock error.
0271 Check date and time setting.
02B0 Previous boot incomplete - Default
configuration used. Start the SETUP and check the settings.
0281 Memory size found by the POSt differs from
EISA CMOS. Initialise the EISA CMOS.
02D0 System cache error - Cache disabled. The cache cannot be used. Contact your service
representative.
02D1 System Memory exceeds the CPU's caching
limit. Contact your service representative.
02F4 EISA CMOS not writeable.
02F5 DMA Test Failed.
02F6 Software NMI Failed.
02F7 Fail-safe Timer NMI Failed.