Bull NovaScale R440 E1, Руководство пользователя, Страница: 331 / 366

User Guide
330
www.bull.com
2. Click [(Network Adapter Name)] in the list.
3.
Click the [Link] and specify the [Speed & Duplex] value the same as the value
specified for HUB.
4. Click [Apply] and click [OK].
You can also add or delete any protocols and services if necessary.
You can operate the process on the property dialog box for local area network which
can be displayed from [Network and Dial-up Connection].
Note: We recommend you add [Network Monitor] at
[AddingServices]. [Network Monitor] can monitor the frame (or
the packet) that the computer installing [Network Monitor] sends
or receives. This tool is valuable when analyzing network
trouble.
5. Check the [Include this location in the search] check box and and specifiy the
correct path.
6. Click [Next].
7. Click [Finish].
Re-install the Network Driver
The network driver will be installed automatically.
Optional Network Board Driver
If you want to use an optional Network Board (Gigabit adapter), the network driver
will be installed automatically. Therefore, the driver attached to the Network board
should not be used. If necessary, install the driver stored in ExpressBuilder DVD.
When using 100BASE TX adapters:
"\002\win\winnt\w2k3amd\dl3\pro100\winx64"
When using 1000BASE T adapters:
"\002\win\winnt\w2k3amd\dl3\pro1000\winx64"
If the installation procedure is not clear, refer to the installation procedure described
below.
If available, you can also refer to the manual provided with the board.
Installing the Optional Network Board Driver
1. Start Device Manager.