Bull NovaScale R440 E1, Руководство пользователя, Страница: 184 / 366

User Guide
183
www.bull.com
14. Select "Yes" for [Reset Configuration Data] on the [Advanced] menu.
This setting is required to change the hardware configuration data. (See “BIOS
Setup Utility” on page 63 for more details.)
15. If the Windows operating system is in use, set the paging file size to the
recommended value (total memory size × 1.5) or a greater value.
Removing DIMMs
Notes:
■
To remove the failed DIMM, check the error message
appearing in POST or NEC ESMPRO to identify the DIMM
socket (group) in which the failed DIMM is installed.
■
The server operates only when at least two DIMMs are
installed.
To remove a DIMM module:
1. Read section “Preparing Your Server for Upgrade” on page 159 .
2. Pull out the server from the rack.
3. Open the logic cover. See “Removing the Logic Cover” on page 178.
4. Open the levers at both sides of the socket from which you remove the DIMM.
The DIMM is unlocked and ready for removal.
5. Replace the logic cover.
6. Install the server on the rack.
Using the Memory RAS Features
The server has the memory mirroring and online spare memory features as well as the
x4/x8 SDDC ECC memory feature, which can automatically correct a memory error
(multi-bit error) causing system shutdown.
Caution
The memory mirroring and online spare memory features are
not available in the normal memory configuration. (The x4/x8
SDDC ECC memory feature can operate in any configuration.)