manualshive.com logo in svg

Bull NovaScale R440 E1, Руководство пользователя, Страница: 296 / 366

Поделиться
Скачать
Bull NovaScale R440 E1 Скачать руководство пользователя страница 296

User Guide 

295 

www.bull.com

Making Backup Copies of System Information

The system information includes the current BIOS settings and any specific
information for the server.

Save the information after completing the system setup.

Without the backup data, you will not be able to recover the information.

You can save the information as described in the following procedure:

1. 

Insert the ExpressBuilder DVD into the Optical Disc drive and reboot the

system.

2. 

Select [Maintenance Tools (Normal mode)].

3. 

Select [English].

4. 

Select [Maintenance Utility].

5. 

Select [System Information Management].

6. 

Insert a floppy disk into the floppy disk drive.

7. 

Select [Save].

Installing with the OEM-FD for Mass Storage Device

This section explains how to setup with the OEM-FD. This is not a standard procedure.
The detailed information is provided by the manual of the Mass Storage Device.

Installation of a Mass storage device not supported by Express Setup

If you would like to install or re-install the OS when the system has a new mass storage
device not supported by the ExpressBuilder, you have to set as follows.

1. 

Read the manual supplied with the mass storage device before setting the

server.

2. 

If the mass storage device is a RAID Controller, configure the RAID system

before running the ExpressBuilder.

3. 

Boot the system from the ExpressBuilder DVD.

4. 

a. 

When the "Use Existing Array" dialog box appears, check "Skip
Creating a Virtual disk".

b. 

Check "Apply OEM-FD for Mass storage device".

5. 

Copy the driver for the mass storage device in the Express Setup.

Insert the floppy disk attached to the mass storage device into the floppy disk
drive.

Follow the on-screen messages to continue the Express Setup.

Содержание NovaScale R440 E1















































































































































































































































































































































































Отзывы:

Нет отзывов