manualshive.com logo in svg

Bull NovaScale R440 E1, Руководство пользователя, Страница: 269 / 366

Поделиться
Скачать
Bull NovaScale R440 E1 Скачать руководство пользователя страница 269

User Guide 

268 

www.bull.com

Service Packs supported by the ExpressBuilder

The ExpressBuilder DVD attached to the server supports following combination of the
OS installation media and Service Pack.

■

Windows Server 2003 R2 x64 Edition

- OS installation media (with Service Pack 2)

- OS installation media (No Service Pack) + Service Pack 2

- OS installation media (No Service Pack)

■

Windows Server 2003 R2 

- OS installation media (with Service Pack 2)

- OS installation media (No Service Pack) + Service Pack 2

- OS installation media (No Service Pack)

■

Windows Server 2003

- OS installation media (with Service Pack 1)

- OS installation media (with Service Pack 1) + Service Pack 2

About the Hardware Components

When you install Windows Server 2003, Express Setup requires several preparations if
this computer uses the following hardware components.

Installing on the Mirrored Volume

If you want to install Windows Server 2003 on the volume that is mirrored using "Disk
Management", invalidate the mirroring before the installation, and validate the
mirroring again after the installation.

You can create, invalidate or delete the mirror volume by using "Disk Management" in
"Computer Management".

Mounting MO Device

Do not mount an MO device on this computer during the Windows installation.

About Removable Media

Do not set any removable media, such as a DAT, into the device mounted on this
computer during the Windows installation.

Connecting Hard Disk Drive

Do not connect other hard disk drives than the drive on which you want to create the
Windows system drive.

Содержание NovaScale R440 E1















































































































































































































































































































































































Отзывы:

Нет отзывов