Distillation Process Analyzer DPA-4.5
Dismantling
11 Dismantling
At the end of its service life, the device must be dismantled and
disposed of in an environmentally friendly manner.
11.1 Safety
Personnel
−
Dismantling is only to be performed by specialists for
potentially explosive atmospheres.
−
Have work on the electrical system performed only by
electricians.
Fundamental principles
WARNING
Danger of injury due to incorrect dismantling
work
Stored residual energy, components with sharp
edges, points and corners in and around the device
or on the required tools can cause injuries.
For this reason:
– Before starting work, ensure there is adequate
space for the dismantling work.
– Use caution when handling open, sharp-edged
components.
– Make sure the working area is clean and orderly!
Components or tools that are loosely stacked or
left lying around are a source of accidents.
– Dismantle the components professionally.
Remember that some components may be very
heavy. Use lifting gear if necessary.
– Secure components so that they cannot fall down
or tip over.
– Should you have any questions, contact the
manufacturer.
152
December 2013