AV-GAD EasyLoader AV-2005 Скачать руководство пользователя страница 65

Страница: 65 / 65

AV-GAD

LIMITED WARRANTY

Av-Gad Systems Ltd

. (Av-Gad) warrants it’s products to be free from production defects

in components, materials used and labor for twelve months following the date of

production. Av-Gad will within the mentioned period, as its option, repair or replace any

product failing to proper operation without charging the purchaser.

This warranty shall not apply to any equipment, or any part thereof,

which has been repaired by others, installed not properly, used

improperly, abused, altered damaged or subjected to forces of nature or

on which the serial and data code is altered or removed.

Av-Gad will not be responsible for any dismantling or reinstallation

expenses. In order to exercise the warranty, the product must be

returned by the purchaser, delivery and transportation costs will be

prepaid and insured to Av-Gad.

After repair or replacement, Av-Gad assumes the cost of returning

products under warranty.

There are no warranties, expressed or implied, which extend beyond

the description of the face hereof.

There is no express or implied warranty of merchantability or a

warranty of fitness for particular purpose. Additionally, this warranty is

in lieu of all other obligations or liabilities on the part of Av-Gad.

Any action for breach of warranty, including but not limited to any

implied warranty of merchantability, must be brought within three

months following the end of the warranty period. In no case shall Av-

Gad be liable to anyone for any consequential or incidental damages for

breach of this or any other warranty, expressed or implied, even if the

loss or damage is caused by the seller’s own negligence or fault.

Av-Gad is not an insurer of either the property or safety of the user’s

employees, family, or 3rd part and limits its liability for any loss or damage including

incidental or consequential damages to Av-Gad original selling price of the product

regardless of the cause of such a loss or damage.

Av-Gad hereby declares that service, technical support and spare parts will be supplied

for 60 month following the date of production. Price list for such services will be

updated from time to time.

Item 4718_2008

Содержание EasyLoader AV-2005


































































Результаты поиска

Содержание EasyLoader AV-2005

Отзывы:

Бренды по названию

Популярные бренды

AV-GAD EasyLoader AV-2005, Инструкция по установке и эксплуатации

Результаты поиска

Содержание EasyLoader AV-2005

Отзывы:

Бренды по названию

Популярные бренды