25
4
Delay
Delete
Key 4
DELAY DELETE (INSTANT PROTECTION)
Cancels Entry Delay in zones selected as ‘Delayed’ zones. All zones become Instant. ‘d’ is
displayed in confirmation. Instant Protection becomes effective only if System is armed
within 20 seconds following hold-down of key 4.
5
Chime
Key 5
DOOR CHIME
Enables Chime when zone troubled (open). Door Chime operates on Chime-programmed
zones. Hold-down key 5 enables and disables the function.
Chime mode is confirmed by ‘c’ display on keypad.
6
Telephone
Key 6
DIALER TEST & FOLLOW-ME PROGRAMMING
Test is performed in ‘DISARMED’ mode.
Function
Via AV-706/707 Keypad
Via AV-701 Series Keypad
Displays Programmed Follow
Me Telephone Numbers Without
Dialing
Hold-down key ‘6’
Hold-down key ‘6’
Follow Me telephone number
programming
Hold-down ‘6’ then hold-down
‘6’ again
Hold-down ‘6’ then hold-
down ‘6’ again
Programmed Telephone number
Verification (Display and Dial
the telephone numbers)
Hold-down ‘6’ then hold-down
‘7’
‘Dialer Test’ displayed
Hold-down ‘6’ then hold-
down ‘7’
Display programmed telephone numbers without dialing: Within a few seconds, ‘c’ will appear on
the display, followed by the (programmed) ‘Follow Me’ telephone number.
When programming telephone numbers which require a delay for line selecting (‘Pause’) before
dialing, or for other purposes, Hold-Down key ‘0’; a momentary ‘P’ will be displayed (the Pause
delay duration is 3 seconds).
The ‘Follow-Me’ telephone number will be displayed, or displayed and dialed, followed by display-
and-dial of up to three additional telephone numbers.
6
Telephone
then
1
Siren
Address 092 enables ‘Answer now‘ feature (answers remote computer after
one ring). The user attending the control panel can reduce the number of rings before Modem answer
to one ring.
Answer Now is useful when control panel is programmed not to answer incoming calls
(programming of 21 rings or greater at address 091), or for installation with fax or answering
machine on same telephone line with the alarm panel. To enable the ‘Answer Now’ feature, program
01 at address 092. User should hold-down key 6 and then key 1, before the call is made to the control
panel. The panel will acknowledge the command with two beeps and ‘A.’ is displayed.
