C613-50186-01 Rev B
Command Reference for AR2050V
867
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
RIP C
OMMANDS
SHOW
IP
RIP
VRF
INTERFACE
show ip rip vrf interface
Overview
Use this command to display information about the RIP interfaces that are
associated with a specific VRF instance.
For information on filtering and saving command output, see the
with AlliedWare Plus” Feature Overview and Configuration Guide
Syntax
show ip rip {vrf <
vrf-name
>|global} interface
[<
interface-name
>]
Mode
User Exec and Privileged Exec
Example
To display information about the RIP database associated with a VRF instance
‘blue’, use the command:
awplus#
show ip rip vrf blue interface
Output
Figure 25-4:
Example output from
show ip rip vrf blue interface vlan3
NOTE
:
The Time parameter operates as follows:
•
RIP updates occur approximately every 30 seconds.
•
Each update resets a count-down timer to 180 seconds (3 minutes).
•
The Time parameter displays the count-down from the last reset.
Related
Commands
Command
changes
Version 5.4.6-2.1: VRF-lite support added.
Parameter
Description
vrf
Specific VRF instance.
<vrf-name>
The name of the VRF instance.
global
The global routing and forwarding table.
<interface-name>
The IP RIP interface (VLAN).
Codes: R - RIP, Rc - RIP connected, Rs - RIP static
C - Connected, S - Static, O - OSPF, B - BGP
Network Next Hop Metric From If Time
Rc 192.168.30.0/24 1 vlan3
R 192.168.45.0/24 192.168.30.1 2 192.168.30.1 vlan3 02:46