C613-50186-01 Rev B
Command Reference for AR2050V
1402
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
R
OUTE
M
AP
C
OMMANDS
SET
ATOMIC
-
AGGREGATE
set atomic-aggregate
Overview
Use this command to add an atomic aggregate set clause to a route map entry.
When a BGP update message matches the route map entry, the device adds the
atomic aggregate attribute to the update.
Use the
no
variant of this command to remove the set clause.
Syntax
set atomic-aggregate
no set atomic-aggregate
Mode
Route-map Configuration
Usage
This command is valid for BGP update messages only.
Example
To use entry
3
of the route map called
rmap1
to add the atomic aggregator
attribute to matching update messages, use the commands:
awplus#
configure terminal
awplus(config)#
route-map rmap1 permit 3
awplus(config-route-map)#
set atomic-aggregate
Related
Commands