C613-50186-01 Rev B
Command Reference for AR2050V
2613
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
F
IREWALL
C
OMMANDS
SHOW
FIREWALL
RULE
CONFIG
-
CHECK
show firewall rule config-check
Overview
Use this command to check configuration validity of firewall rules.
An invalid rule will not be active and cannot be hit. This command also shows the
reasons why a rule is not valid.
Syntax
show firewall rule config-check
Mode
Privileged Exec
Usage
Firewall rules are applied to applications and entities. A rule is not valid if either the
application, source entity or destination entity the rule applies to is not configured
properly.
To configure applications and entities, see Application and Entity Commands.
Examples
To check configuration validity of firewall rules, use the command:
awplus#
show firewall rule config-check
Output
Figure 56-10: Example output from the
show firewall rule config-check
command if rule configuration errors are detected
Output
Figure 56-11: Example output from the s
how firewall rule config-check
command if all rules are valid
Related
commands
awplus#show firewall rule config-check
Rule 10:
Application does not have a protocol configured
"From" entity does not exist
"To" entity has no subnet or host addresses
awplus#show firewall rule config-check
All rules are valid