Allied Telesis AR2050V, Справочник по командам, Страница: 1270 / 2824

C613-50186-01 Rev B Command Reference for AR2050V 1270
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
BGP
AND
BGP4+ C
OMMANDS
NEIGHBOR ROUTE
-
MAP
neighbor route-map
Overview Use this command to apply a route map to incoming or outgoing routes for BGP or
BGP4+.
Use the no variant of this command to remove a route map from a BGP or BGP4+
route.
Syntax
neighbor < neighborid > route-map < mapname > {in|out}
no neighbor < neighborid > route-map < mapname > {in|out}
Mode [BGP] Router Configuration or IPv4 Address Family Configuration
Mode [BGP4+] IPv6 Address Family Configuration
Usage Use the neighbor route-map command to filter updates and modify attributes. A
route map is applied to inbound or outbound updates. Only the routes that pass
the route map are sent or accepted in updates.
Parameter Description
<neighborid> {
<ip-address>
|
ipv6-addr>
|
<peer-group>
}
<ip-address>
Specify the address of an IPv4 BGP neighbor, in
dotted decimal notation A.B.C.D.
<ipv6-addr>
Specify the address of an IPv6 BGP4+ neighbor,
entered in hexadecimal in the format X:X::X:X.
<peer-group>
Enter the name of an existing peer-group. For
information on how to create peer groups, refer
to the
neighbor peer-group (add a neighbor)
command, and neighbor route-map command.
When this parameter is used with this
command, the command applies on all peers in
the specified group.
<mapname>
Specifies name of the route-map.
in
Specifies that the access list applies to incoming advertisements.
out
Specifies that the access list applies to outgoing advertisements.