C613-50186-01 Rev B
Command Reference for AR2050V
1793
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
T
RAFFIC
C
ONTROL
C
OMMANDS
SHOW
TRAFFIC
-
CONTROL
RED
-
CURVE
show traffic-control red-curve
Overview
Use this command to show configured RED curve templates.
Syntax
show traffic-control red-curve
<red-curve-name>
Default
None
Mode
Privileged Exec
Usage
If you have not configured some parameters, default values will display. If no RED
curve name is given, all configured RED curves are shown.
Example
To show all RED curves, use the command:
awplus#
show traffic-control red-curve
To show a specified red curve called “TCP_session_1”, use the command:
awplus#
show traffic-control red-curve TCP_session_1
Output
Figure 38-6:
Example output from
show traffic-control red-curve
Parameter
Description
<red-curve-name>
The name of the RED curve. The default RED curve is
red-curve default limit 127 avpkt 576B min 10 max 32
prob 2.
awplus#show traffic-control red-curve
Traffic Control RED Curves:
RED curve default:
Average packet size: 576 bytes
Minimum: 10 packets
Maximum: 32 packets
Limit: 127 packets
Drop probability: 2%
ECN marking: disabled
RED curve TCP_session_1:
Average packet size: 576 bytes
Minimum: 20 packets
Maximum: 60 packets
Limit: 127 packets
Drop probability: 20%
ECN marking: disabled