Allied Telesis AR2050V, Справочник по командам, Страница: 1776 / 2824

C613-50186-01 Rev B Command Reference for AR2050V 1776
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
T
RAFFIC
C
ONTROL
C
OMMANDS
L
3-
FILTERING ENABLE
l3-filtering enable
Overview Use this command to enable traffic control for bridged traffic on a bridge interface.
Use the no variant of this command to disable traffic control for bridged traffic on
a bridge interface.
Syntax l3-filtering enable
no l3-filtering enable
Default Traffic control is disabled by default for bridged traffic.
Mode Interface mode for a bridge interface
Example To enable traffic control for bridged traffic on br1, use the commands:
awplus# configure terminal
awplus(config)# interface br1
awplus(config-if)# l3-filtering enable
Related
Commands
traffic-control
Command
changes
Version 5.4.7-0.1: command added. Previously, traffic control was enabled by
default on all bridge interfaces.