Allied Telesis AR2050V, Справочник по командам, Страница: 1232 / 2824

C613-50186-01 Rev B Command Reference for AR2050V 1232
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
BGP
AND
BGP4+ C
OMMANDS
NEIGHBOR ENFORCE
-
MULTIHOP
neighbor enforce-multihop
Overview Use this command to enforce the requirement that BGP and BGP4+ neighbors
form multihop connections.
Use the no variant of this command to turn off this feature.
Syntax neighbor <neighborid> enforce-multihop
no neighbor < neighborid> enforce-multihop
Mode [BGP] Router Configuration or IPv4 Address Family Configuration
Mode [BGP4+] Router Configuration
Parameter Description
< neighborid > { <ip-address> | <ipv6-addr> | <peer-group> }
<ip-address>
The address of an IPv4 BGP neighbor, in dotted
decimal notation A.B.C.D.
<ipv6-addr>
The address of an IPv6 BGP4+ neighbor, entered
in hexadecimal in the format X:X::X:X.
<peer-group>
Name of an existing peer-group. For
information on how to create peer groups, refer
to the
neighbor peer-group (add a neighbor)
command, and neighbor route-map command.
When this parameter is used with this
command, the command applies on all peers in
the specified group.