Allied Telesis AR2050V, Справочник по командам, Страница: 2599 / 2824

C613-50186-01 Rev B Command Reference for AR2050V 2599
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
F
IREWALL
C
OMMANDS
FIREWALL
firewall
Overview Use this command to configure the firewall.
Use the no variant of this command to remove all firewall configuration.
Syntax
firewall
no firewall
Mode Global Configuration
Usage This command allows you to enter the Firewall Configuration mode. The
command prompt for this mode is
awplus(config-firewall)#
In the Firewall Configuration mode, you can:
• Enable or disable firewall protection, see the protect (Firewall) command.
• Create, move, or delete rules for the firewall, see the rule (Firewall) command
and the move rule (Firewall) command.
Examples To configure the firewall, use the commands:
awplus# configure terminal
awplus(config)# firewall
awplus(config-firewall)#
To remove all firewall configuration, use the commands:
awplus# configure terminal
awplus(config)# no firewall
Validation
commands
show firewall
show running-config firewall