C613-50186-01 Rev B
Command Reference for AR2050V
1789
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
T
RAFFIC
C
ONTROL
C
OMMANDS
SHOW
TRAFFIC
-
CONTROL
INTERFACE
show traffic-control interface
Overview
Use this command to display information about interfaces known to traffic control,
such as the applied policy, the virtual-bandwidth configured on the interface, the
bandwidth reserved for system traffic and the overhead applied to the packet size
calculations. If no interface name is specified, information is shown for all
interfaces known to traffic control.
Syntax
show traffic-control interface [
<interface-name>
]
Default
None
Mode
Privileged Exec
Examples
To show traffic control information for all interfaces, use the command:
awplus#
show traffic-control interface
Output
Figure 38-4:
Example output from
show traffic-control interface
Parameter
Description
<interface-name>
Name of interface to display information
awplus#show traffic-control interface
Traffic Control Interface Information
eth1:
Policy: A
Virtual bandwidth: Not set (optional)
System bandwidth: 5%
Packet overhead: 0 Bytes
eth2:
Policy: A
Virtual bandwidth: 2000 kbit
System bandwidth: 5%
Packet overhead 24 Bytes (Ethernet transport layer)
vlan1:
Policy: Default policy
Virtual bandwidth: Not set (optional)
Packet overhead: 0 Bytes