C613-50186-01 Rev B
Command Reference for AR2050V
1791
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
T
RAFFIC
C
ONTROL
C
OMMANDS
SHOW
TRAFFIC
-
CONTROL
POLICY
show traffic-control policy
Overview
Use this command to show information about the configured traffic control
policies and classes. This command shows the configured traffic control policies
and the interfaces that they are applied to. Only non-default configuration
parameters are shown.
If no policy name is given, all configured policies are displayed.
Syntax
show traffic-control policy [<
policy-name
>]
Default
None
Mode
Privileged Exec
Examples
To show all traffic control policies, use the command:
awplus#
show traffic-control policy
Output
Figure 38-5:
Example output from
show traffic-control policy
Parameter
Description
<policy-name>
Name of policy to display
awplus#show traffic-control policy
Traffic Control Policies:
Policy A:
Type: wrr
Applied interfaces: eth1 eth2
Classes:
Class B5001:
Weight: 30
Class B5002:
Weight: 60
Red curve: default
Policy P:
Type: priority
Applied interfaces: None
Classes:
Class P10:
Priority: 10
Peak rate (PIR): 5000kbit
Class P3:
Priority: 3
Peak rate (PIR): 8000kbit
Sub-queue type: htb
Red curve TCP_session_1