C613-50186-01 Rev B
Command Reference for AR2050V
1165
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
BGP
AND
BGP4+ C
OMMANDS
CLEAR
BGP
IPV
6 (
IPV
6
ADDRESS
) (BGP4+
ONLY
)
clear bgp ipv6 (ipv6 address) (BGP4+ only)
Overview
Use this command to reset the IPv6 BGP4+ connection to the peer specified by the
IP address.
Syntax
clear bgp ipv6
<ipv6-addr>
[in [prefix-filter]|out|soft
[in|out]]
Mode
Privileged Exec
Examples
Use the following command to clear the BGP4+ connection to peer at IPv6 address
2001:0db8:010d::1, and clearing all incoming routes.
awplus#
clear ip bgp 2001:0db8:010d::1 in
Parameter
Description
<ipv6-addr>
Specifies the IPv6 address of the neighbor whose connection is to
be reset, entered in hexadecimal in the format X:X::X:X.
ipv6
Clears all IPv6 address family peers. Configure parameters relating
to the BGP4+ exchange of IPv6 prefixes.
in
Indicates that incoming advertised routes will be cleared.
prefix-filter
Specifies that a prefix-list will be sent, by the ORF mechanism, to
those neighbors with which the ORF capability has been
negotiated. The neighbors will be triggered to resend updates,
which match the prefix-list filter, to the local router. The local
router will then perform a soft reconfiguration.
out
Indicates that outgoing advertised routes will be cleared.
soft in
Soft inbound reset causes the neighbors to resend all their
updates to the local device, without resetting the connection or
clearing the entries in the local device. So, the local device stores
new updates, and uses them to systematically replace existing
table entries. This process can use a considerable amount of
memory.
soft out
Soft outbound reset causes the device to simply resend all its
updates to the specified neighbor(s), without resetting the
connection, or clearing table entries.