C613-50186-01 Rev B
Command Reference for AR2050V
1163
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
BGP
AND
BGP4+ C
OMMANDS
CLEAR
IP
BGP
EXTERNAL
(BGP
ONLY
)
clear ip bgp external (BGP only)
Overview
Use this command to reset the BGP connections to all external peers.
Syntax
clear ip bgp external [in [prefix-filter]|out|soft [in|out]]
clear ip bgp external
clear ip bgp external in [prefix-filter]
clear ip bgp external out
clear ip bgp external soft [in|out]
Mode
Privileged Exec
Examples
awplus#
clear ip bgp external out
Parameter
Description
external
Clears all external peers.
ipv4
Clears all IPv4 address family peers. Configure parameters relating
to the BGP exchange of IPv4 prefixes.
in
Indicates that incoming advertised routes will be cleared.
prefix-filter
Specifies that a prefix-list will be sent, by the ORF mechanism, to
those neighbors with which the ORF capability has been
negotiated. The neighbors will be triggered to resend updates,
which match the prefix-list filter, to the local router. The local
router will then perform a soft reconfiguration.
out
Indicates that outgoing advertised routes will be cleared.
soft in
Soft inbound reset causes the neighbors to resend all their
updates to the local device, without resetting the connection or
clearing the entries in the local device. So, the local device stores
new updates, and uses them to systematically replace existing
table entries. This process can use a considerable amount of
memory.
soft out
Soft outbound reset causes the device to simply resend all its
updates to the specified neighbor(s), without resetting the
connection, or clearing table entries.