Allied Telesis AR2050V, Справочник по командам, Страница: 2614 / 2824

C613-50186-01 Rev B Command Reference for AR2050V 2614
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
F
IREWALL
C
OMMANDS
SHOW DEBUGGING FIREWALL
show debugging firewall
Overview Use this command to show the firewall and Network Address Translation (NAT)
debugging status.
You can use the debug firewall command to enable firewall and NAT debugging.
For more information about NAT, see the Firewall_and Network Address
Translation (NAT) Feature Overview and Configuration_Guide .
Syntax
show debugging firewall
Mode Privileged Exec
Examples To show the firewall and NAT debugging status, use the command:
awplus# show debugging firewall
Output Figure 56-12: Example output from the show debugging firewall command
Related
commands
debug firewall
awplus#show debugging firewall

Firewall Debugging Status: on