C613-50186-01 Rev B
Command Reference for AR2050V
1785
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
T
RAFFIC
C
ONTROL
C
OMMANDS
SHOW
RUNNING
-
CONFIG
TRAFFIC
-
CONTROL
show running-config traffic-control
Overview
Use this command to display the current traffic control configuration.
Syntax
show running-config traffic-control
Default
None
Mode
Privileged Exec
Example
To show the traffic control configuration section of the running configuration, use
the command:
awplus#
show running-config traffic-control
Output
Figure 38-2:
Example output from
show running-config traffic-control
Related
Commands
show traffic-control interface
show traffic-control rule config-check
awplus#show running-config traffic-control
traffic-control
policy A wrr
class B5001 weight 30
class B5002 weight 60
policy P priority
class P10 priority-level 10 max 5mbit
class P3 priority-level 3 max 8mbit sub-class-policy htb
sub-class H cir 3mbit bc 100000
sub-class I cir 5mbit bc 100000
class P2 priority-level 2
policy token-bucket htb
class A cir 5mbit pir 6mbit preference 2
class B cir 2mbit pir 4mbit bc 100000 be 100000 preference 3 sub-class-policy htb
sub-class C cir 1mbit pir 4mbit bc 50000
sub-class D cir 1mbit pir 4mbit bc 50000 sub-sub-class-policy htb
sub-sub-class E cir 500kbit pir 4mbit bc 50000 set-dscp af23
sub-sub-class F cir 500kbit pir 4mbit bc 50000 set-dscp af31
rule 10 match udp-5001 from ipv6.vlan3 to ipv6.eth2 policy A.B5001
rule 20 match udp-5002 from ipv6.vlan3 to ipv6.eth2 policy A.B5002
rule 30 match udp-5001 from main.vlan to main.wan policy A.B5001
rule 40 match udp-5002 from main.vlan to main.wan policy A.B5002
rule 50 match udp-5002 from main.vlan to main.eth1 policy A.B5002
interface eth2 virtual-bandwidth 2mbit overhead ethernet
traffic-control enable