Allied Telesis AR2050V, Справочник по командам, Страница: 2594 / 2824

56
C613-50186-01 Rev B Command Reference for AR2050V 2594
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Firewall Commands
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
AlliedWare Plus Firewall. For more information see the
Firewall_and Network
Address Translation (NAT) Feature Overview and Configuration_Guide .
The table below lists the firewall commands and their applicable modes.
Figure 56-1: Firewall commands and applicable modes
Command List • “ clear firewall connections ” on page 2596
• “ connection-limit (Firewall) ” on page 2597
• “ connection-log events ” on page 2598
Mode Command
Privileged Exec clear firewall connections
debug firewall
show debugging firewall
show firewall
show firewall connections
show firewall rule
show firewall rule config-check
show running-config firewall
Global Configuration firewall
Firewall Configuration protect (Firewall)
rule (Firewall)
move rule (Firewall)