Allied Telesis AR2050V, Справочник по командам, Страница: 2603 / 2824

C613-50186-01 Rev B Command Reference for AR2050V 2603
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
F
IREWALL
C
OMMANDS
PROTECT
(F
IREWALL
)
protect (Firewall)
Overview Use this command to enable firewall protection.
Use the no variant of this command to disable firewall protection without losing
the existing firewall configuration.
Syntax protect
no protect
Default Firewall protection is disabled by default.
Mode Firewall Configuration
Usage Firewall protection is disabled by default and all traffic can pass through the
firewall. When the firewall is enabled and no rules are added, all traffic will be
blocked by default. You can use the
rule (Firewall) command to configure rules to
allow traffic to pass through the firewall.
Examples To enable firewall protection, use the commands:
awplus# configure terminal
awplus(config)# firewall
awplus(config-firewall)# protect
To disable firewall protection, use the commands:
awplus# configure terminal
awplus(config)# firewall
awplus(config-firewall)# no protect
Validation
commands
show firewall
show running-config firewall