C613-50186-01 Rev B
Command Reference for AR2050V
1487
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
VRF-
LITE
C
OMMANDS
REDISTRIBUTE
(
INTO
BGP
OR
BGP4+)
To apply the above example to a specific VRF instance named
blue
, use the
following commands:
awplus(config)#
router bgp 12
awplus(config-router)#
address-family ipv4 vrf blue
awplus(config-router-af)#
redistribute ospf route-map rmap1
The following example shows the configuration of a route-map named
rmap2
,
which is then applied using the
redistribute route-map
command.
awplus#
configure terminal
awplus(config)#
route-map rmap2 permit 3
awplus(config-route-map)#
match interface vlan1
awplus(config-route-map)#
set metric-type 1
awplus(config-route-map)#
exit
awplus(config)#
router ospf 100
awplus(config-router)#
redistribute bgp route-map rmap2
Note that configuring a route-map and applying it with the redistribute route-map
command allows you to filter which router are distributed from another routing
protocol (such as OSPF with BGP). A route-map can also set the metric, tag, and
metric-type of the redistributed routes.
Command
changes
Version 5.4.6-2.1: VRF-lite support added.