C613-50186-01 Rev B
Command Reference for AR2050V
1351
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
BGP
AND
BGP4+ C
OMMANDS
SHOW
IP
BGP
NEIGHBORS
(BGP
ONLY
)
Output
Figure 29-14: Example output from
show ip bgp neighbors 10.10.10.72
If available the following is shown:
•
Session information
–
Neighbor address, ASN information and if the link is external or
internal
–
BGP version and status
–
Neighbor capabilities for the BGP session
–
Number of messages transmitted and received
•
IPv4 unicast address family information
–
BGP table version
–
IPv4 Address Family dependent capabilities
–
IPv4 Communities
–
IPv4 Route filters for ingress and egress updates
–
Number of announced and accepted IPv4 prefixes
•
Connection information
–
Connection counters
–
Graceful restart timer
–
Hop count to the peer
–
Next hop information
–
Local and external port numbers
awplus#show ip bgp neighbors 10.10.10.72
BGP neighbor is 10.10.10.72, remote AS 100, local AS 100, internal
link
Member of peer-group group1 for session parameters
BGP version 4, remote router ID 0.0.0.0
BGP state = Active
Last read , hold time is 90, keepalive interval is 30 seconds
Received 0 messages, 0 notifications, 0 in queue
Sent 0 messages, 0 notifications, 0 in queue
Route refresh request: received 0, sent 0
Minimum time between advertisement runs is 5 seconds
For address family: IPv4 Unicast
BGP table version 1, neighbor version 0
Index 1, Offset 0, Mask 0x2
group1 peer-group member
NEXT_HOP is always this router
0 accepted prefixes
0 announced prefixes
Connections established 0; dropped 0
Next connect timer due in 33 seconds