Allied Telesis AR2050V, Справочник по командам, Страница: 1404 / 2824

C613-50186-01 Rev B Command Reference for AR2050V 1404
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
R
OUTE
M
AP
C
OMMANDS
SET COMMUNITY
set community
Overview Use this command to add a community set clause to a route map entry.
When a BGP update message matches the route map entry, the device takes one
of the following actions:
• changes the update’s community attribute to the specified value or values,
or
• adds the specified community value or values to the update’s community
attribute, if you specify the
additive parameter after specifying another
parameter. or
• removes the community attribute from the update, if you specify the none
parameter
Use the no variant of this command to remove the set clause.
Syntax
set community {[ <1-65535> ][ AA:NN ] [internet] [local-AS]
[no-advertise] [no-export] [additive]}
no set community {[ AA:NN ] [internet] [local-AS] [no-advertise]
[no-export] [additive]}
set community none
no set community none
Parameter Description
<1-65535>
The AS number of the community as an integer not in AA:NN
format.
AA:NN
The Autonomous System (AS) number of the community, in AA:NN
format. AS numbers are assigned to the regional registries by the
IANA (
www.iana.org ) and can be obtained from the registry in your
region.
AA and NN are both integers from 1 to 65535.
AA is the AS number; NN is a value chosen by the ASN administrator.
local-AS
The community of routes that must not be advertised to external
BGP peers (this includes peers in other members’ Autonomous
Systems inside a BGP confederation).
internet
The community of routes that can be advertised to all BGP peers.
no-advertise
The community of routes that must not be advertised to other BGP
peers.
no-export
The community of routes that must not be advertised outside a BGP
confederation boundary (a standalone Autonomous System that is
not part of a confederation should be considered a confederation
itself ).